Skocz do zawartości

Nowy szablon forum

mygo.pl

Stworzyliśmy dla Was nowy wygląd forum. Z pewnością znajdziesz rzeczy, które wg Ciebie mogą zostać zmienione - wspomnij o tym w specjalnym wątku.

Czytaj więcej

Jak założyć własną sieć

serwerów CS

Zastanawiasz się nad prowadzeniem własnej sieci serwerów? Przeczytaj podstawowe informacje, na które należy zwrócić uwagę, przy takim projekcie.

Czytaj więcej

Tworzymy spis sieci

dodaj swoją

Dodaj sieć do której należysz, pozwoli to na promocję i budowę ogólnopolskiej bazy sieci CS.

Czytaj więcej

Wszystkie komendy CSGO


angel
 Udostępnij

Rekomendowane odpowiedzi

  • admin

Postaram się stworzyć listę komend CSGO i wprowadzić ład w komendach na forum-  opisywać je będziemy dokładniej w osobnych wątkach i kategoriach.

 

Nazwa komendy

Syntax Opis
bot_add bot_add [T / CT] [Difficulty] [Name] This command adds a bot to your current game. If you specify a team (T or CT), the bot will be added to that team. You can also optionally specify a difficulty and a name (if there is an existing profile).
bot_add_ct bot_add_ct [Difficulty] [Name] This console command adds a bot to the CT side. If the bot spawns dead, it will respawn at the start of the next round. You can optionally specify a difficulty and a name (if there is an existing profile).
bot_addWszystkie _t bot_add_t [Difficulty] [Name] This command adds a bot to the T side. If the bot spawns dead, it will respawn at the start of the next round. You can optionally specify a difficulty and a name (if there is an existing profile).
cl_crosshairgap cl_crosshairgap [Gap] This console command will adjust the size of the gap in the middle of your crosshair. The smaller the value, the smaller the gap.
cl_crosshairsize cl_crosshairsize This command controls the length and size of the 4 lines that make up a standard crosshair. Using a low value will give your crosshair very slight lines, and using a large value makes your crosshair have very long lines.
cl_crosshairstyle cl_crosshairstyle [Style] This command sets the style of your crosshair such as its general shape and whether or not it opens up whenever your character moves around.
cl_crosshairthickness cl_crosshairthickness [Thickness] This console command customizes the thickness of your in game crosshair.
cl_hud_color cl_hud_color [HUD Color] This is the console command used to change and customize the color of your HUD (heads up display). It can be changed to a variety of colors, which we have listed examples for.
cl_hud_playercount_showcount cl_hud_playercount_showcount [0 / 1] This useful console command customizes your HUD by changing the display of players alive on each team from showing each of their Steam avatars to just showing a number for how many of each team is alive.
cl_hud_radar_scale cl_hud_radar_scale [Radar Scale] This useful console command controls how much room in your HUD your radar takes up. You can choose to make it a smaller feature or larger than the default value.
cl_radar_scale cl_radar_scale [Radar Scale] This command adjusts the scale of your radar, which affects how zoomed in or out the radar is. A lot of players use this command to zoom the radar out and have a complete view of the map.
cl_righthand cl_righthand [0 / 1] This is the command that moves your gun to your left hand, also known as the switch hand command. Your gun and other weapons will be on the left side of your screen, which some people prefer.
cl_showfps cl_showfps [0 / 1] This command produces a simple FPS (frames per second) count in the top left corner of your screen. Unlike the net_graph command, the only value shown is your FPS, which some players like for its simplicity.
demo_pause demo_pause This useful console command is used to pause the demo you're watching. Playback can be resumed with the command demo_resume.
demo_resume demo_resume This useful command is used to resume the demo you're watching, if you have previously paused it. To pause demos, use the command demo_pause.
demo_timescale demo_timescale [Playback speed] This command sets how quickly the demo is played. In other words, it can be used to fast forward through rounds you're not interested in watching.
demo_togglepause demo_togglepause Use this command when watching demos to toggle between being paused or not. The good thing about this command is then it will pause or play the demo, depending on if its running when the command is entered.
game_mode game_mode [Game Mode] This command can be used in conjunction with the game_type command to change the type of game you are playing (casual, deathmatch, etc). See argument information for help.
game_type game_type [Game Type] This command can be used with the game_mode command to change the game you are playing (e.g. arms race, competitive, etc). See argument information for combinations and help.
give give [Kod broni] Komenda pozwalająca na dodanie dowolnej broni. Kody broni znajdziesz tu.
hurtme hurtme [Damage] This command will hurt your character with the specified amount of damage (1 = 1HP).
mp_ignore_round_win_conditions mp_ignore_round_win_conditions [0 / 1] This command can be used to enable and disable round win conditions. If round win conditions are disabled (ignored), then the conditions that would usually make a round end (e.g. bomb exploding, team being eliminated) will no longer make the round end - the round would last forever, until manually ended. By default, this command is disabled (meaning win conditions are not ignored).
mp_warmup_end mp_warmup_end Komenda na koniec rozgrzewki.
noclip noclip This command will toggle noclip for your player. When in noclip, you can fly and will pass through solid objects like walls.
say say [Message] This command will make you say the specified message in chat.
say_team say_team [Message] This command will make you say the specified message in team chat.
sensitivity sensitivity [Sensitivity] This command sets your mouse sensitivity to the specified value.
unbind unbind [Key] This command removes any bind bound to the specified key.
viewmodel_fov viewmodel_fov [FOV] This command sets your client's FOV to the specified number. You can set your FOV to a maximum of 68 using this command. The default field of view is 60.
viewmodel_offset_x viewmodel_offset_x [X Offset] This command sets the X offset of your view model - i.e. how far left or right it is. Your view model is your hand (and the gun in it) that displays in first person mode. The maximum value is 2.5 and the minimum value is -2.5.
viewmodel_offset_y viewmodel_offset_y [Y Offset] This command sets the Y offset of your view model - i.e. how close or far from your character is. Your view model is your hand (and the gun in it) that displays in first person mode. The maximum value is 2 and the minimum value is -2.
viewmodel_offset_z viewmodel_offset_z [Z Offset] This command sets the Z offset of your view model - i.e. how far up or down it is. Your view model is your hand (and the gun in it) that displays in first person mode. The maximum value is 2 and the minimum value is -2.
voice_enable voice_enable [0 / 1] This command sets whether or not voice communication is enabled for your client. Setting this to 0 will disable voice. Default is 1 (enabled).
bind bind [Bind Key] ["Bind Command"] This command will bind a command, or list of commands, to a key on your keyboard or button on your mouse. Binds can make your CS:GO experience much more convenient, and is a very important command in the game.
bind_osx bind_osx [Bind Key] ["Bind Command"] This command will bind a command, or list of commands, to a key on your keyboard or button on your mouse. This command is for OSX (Mac).
bot_difficulty bot_difficulty [Difficulty] This console command sets the difficulty of any bots you add to a private server. Set this to 0 for easy bots, 1 for normal bots, 2 for hard bots and 3 for expert bots.
bot_quota bot_quota [Amount] This command adjusts the maximum number of bots you can have in your server. The default value is 10.
cl_crosshair_drawoutline cl_crosshair_drawoutline [0 / 1] This console command can be used to enable and disable the small black outline that is around your crosshair. This can enhance crosshair visibility for some players.
cl_crosshair_outlinethickness cl_crosshair_outlinethickness [Thickness] This useful console command adjusts how thick the outline of your crosshair is. It is an important command to adjust to ensure your aim is as good as it can be.
cl_crosshaircolor cl_crosshaircolor This console command sets the color that your crosshair shows up as. You can set a value between 0 and 4.
cl_draw_only_deathnotices cl_draw_only_deathnotices [0 / 1] This console command is especially useful for CS:GO fragmovie makers, as it strips down the UI to only include the crosshair and the kill feed. These are the two things needed in videos.
cl_radar_always_centered cl_radar_always_centered [0 / 1] This command decided whether or not your radar is always centered to your location. Turning this feature off can be useful, as when you're by the edge of the map less of the radar's space is taken up by empty space, meaning you can see your surroundings more clearly.
cl_radar_rotate cl_radar_rotate [0 / 1] This command toggles whether or not your radar rotates as you rotate and look around with your camera. Some players find disabling this feature makes it easier to use the radar.
joy_inverty joy_inverty [0 / 1] This console command is used to set whether you want to invert the Y axis for looking around on a joystick. When this command is turned on, moving the joystick up, or forward, will make your character look down.
joy_movement_stick joy_movement_stick [0 / 1 / 2] This console command is used to determine which stick on the joystick controls the movement of your player model.
key_listboundkeys key_listboundkeys This console command lists all of the keys and buttons you have that have a specific action bound to them (e.g. the space bar being bound to jump).
sv_infinite_ammo sv_infinite_ammo [0 / 1 / 2] This command, if set to 1, will give you infinite ammunition for your weapon allowing you to fire your gun continuously. If you set this command to 2, you will have infinite ammo to reload with, but you will still run out of ammo after firing all of the bullets in your gun's clip.
cl_autowepswitch cl_autowepswitch [0 / 1] This command changes whether or not you automatically equip a weapon you just picked up.
cl_color cl_color This useful command sets your preference for what color you like to be in matchmaking. This color is shown on the radar and on your Steam avatar when in the lobby.
cl_crosshairalpha cl_crosshairalpha [Alpha Value] This command sets how transparent your crosshair is on your screen. The lower the value, the less visible your crosshair is.
cl_hud_playercount_pos cl_hud_playercount_pos [0 / 1] Use this command to adjust where the player count (players who are in the server) menu is shown on your HUD. This also changes where the scoreboard is, that shows rounds won by each team. You can place it at the top of your screen or at the bottom.
cl_pitchdown cl_pitchdown [Degrees] This fun command controls how many degrees down from eye level you can move your camera. That means you can edit this command to allow you to look under you, effectively looking through your character model's legs at what is behind you.
cl_pitchup cl_pitchup [Degrees] This fun console command controls how many degrees from eye level you can look up into the sky. This can be adjusted to let you look so far around that you end up seeing behind you.
cl_radar_icon_scale_min cl_radar_icon_scale_min [Icon Scale] This console command changes how large your character dot appears on the radar.
cl_showpos cl_showpos [0 / 1] This command will show you values for where exactly on the map you are located. This will appear in the top left of your screen by default. It also shows your velocity (run speed).
clear clear This console command clears all of the previous entries and data from the developer console. It is good to do every so often to make the console more readable.
inferno_damage inferno_damage [Damage Per Second] This fun console command is used to change how much damage molotov and incendiary grenades do . When cheats are activated, you can set this value to be incredibly high or incredibly low.
inferno_flame_lifetime inferno_flame_lifetime [Burn Time] This console command changes how long the fires burn from molotov and incendiary grenades. It allows you to make them last for just a moment, or for an extended period of time.
inferno_max_range inferno_max_range [Range] This command sets the maximum distance that flames from a molotov or incendiary grenade can spread from their initial point of impact with the ground.
jpeg jpeg [File Name] This command is used to take a screenshot. You can specify the file name in the command.
map map [Map Code] Use this console command to instantly change the map you're currently playing to a different map.
mp_afterroundmoney mp_afterroundmoney [Amount] This command sets the amount of money that is award to every player on every team at the end of each round, regardless of win/loss. Default is 0 (win/loss bonus is set with a different command).
mp_autokick mp_autokick [0 / 1] This command sets whether or not the auto kick feature should be enabled. The auto kick feature kicks people for being idle (AFK) and team damage. Default is 1 (enabled).
mp_autoteambalance mp_autoteambalance [0 / 1] This command can be used to enable or disable the auto team balance feature. This feature will swap players around teams at the end of a round if there are an unequal amount of players on either time (i.e. if team A has 1 player and team B has 3, at the end of the round, 1 player from team B would be automatically moved over to team A).
net_graph net_graph [0 / 1 / 2 / 3] This command will enable (set to 1) and disable (set to 0) the net graph display, which shows ping, FPS and other client variables.
notarget notarget This command toggles whether or not bots are aware of your player. When this is enabled, bots will not attack you (or even react to you).
sv_grenade_trajectory sv_grenade_trajectory [0 / 1] This command, if enabled (1), shows the trajectory of grenades (as colored lines). Default is 0 (disabled).
viewmodel_presetpos viewmodel_presetpos [1 / 2 / 3] This command will set your X/Y/Z viewmodel offsets to a preset configuration. See argument information for help.
-cl_show_team_equipment -cl_show_team_equipment This command disables the effect of the +cl_show_team_equipment, which puts the names/equipment of the members of your team permanently above their head.
+cl_show_team_equipment +cl_show_team_equipment This command puts the names of your teammates and the equipment they're carrying above their head permanently (usually just shows at the start of the round). Use -cl_show_team_equipment to disable.
mp_drop_knife_enable mp_drop_knife_enable [0 / 1] This command allows players to drop their knives.
sv_autobunnyhopping sv_autobunnyhopping [0 / 1] This command, if set to 1, will make you automatically bunny hop by holding down the space bar. Default is disabled (1).
snd_mvp_volume snd_mvp_volume [Volume] This useful console command sets how long the MVP music is when a player with a MVP kit wins MVP award that round.
sv_ledge_mantle_helper sv_ledge_mantle_helper [0 / 1 / 2] This console command, when enabled, makes it easier to crouch jump into windows or ledges.
sv_prime_accounts_only sv_prime_accounts_only [0 / 1] This command, if set to 1, makes it so that only prime accounts can connect to the server. Default on most servers is 0 (meaning non-prime players can connect).
BindToggle BindToggle [Bind Key] ["Bind Command"] This command assigns a hotkey (key on your keyboard, or button on your mouse) to switch through the various values a specified console command has (when pressed or clicked). This is useful for setting up binds that toggle a certain feature. For example,"voice_enable" would be toggled between 0 and 1 (disabled and enabled).
cl_autobuy cl_autobuy [Weapon codes] This command is used to set up your autobuy preferences, meaning you can purchase the most vital gear each round by just typing "autobuy" into your console once this is set up.
cl_crosshaircolor_b cl_crosshaircolor_b [Blue Value] This console command allows you to set the color of your crosshair with detail, by adjusting its level of blue. The same command exists for red and green.
cl_crosshaircolor_g cl_crosshaircolor_g [Green Value] This console command allows you to set the color of your crosshair with detail, by adjusting its level of green. The same command exists for red and blue.
cl_crosshaircolor_r cl_crosshaircolor_r [Red Value] This console command allows you to set the color of your crosshair with detail, by adjusting its level of red. The same command exists for green and blue.
cl_crosshairgap_useweaponvalue cl_crosshairgap_useweaponvalue [0 / 1] When activated, this command will dynamically adjust the size of your crosshair depending on what weapon you have equipped at the time.
cl_disablehtmlmotd cl_disablehtmlmotd [0 / 1] This command can be used to disable HTML "messages of the day" (MOTDs)in the client (by setting it to 1). HTML MOTDs are the the web pages/text that pops up when you join a server, sometimes they play volume or loud ads. Default is 0, which makes HTML MOTDs enabled.
cl_forwardspeed cl_forwardspeed [Speed] This movement console command is used to set the speed you run at when moving forward.
cl_hideserverip cl_hideserverip [0 / 1] This console command is used to hide the IP of your server in your console. This is particularly useful if you're streaming and don't want viewers to be able to catch your IP address, giving them the chance the DDoS the server.
cl_hud_healthammo_style cl_hud_healthammo_style [0 / 1] This command is used to toggle between whether or not you want your health & armor bars at the bottom of your screen to show their numeric value (e.g 80 health) and a bar to represent this, or just show the number.
cl_idealpitchscale cl_idealpitchscale [Pitch Value] This console command adjusts the pitch of the sound in game, and can cause shooting bullets sound different to usual.
cl_rebuy cl_rebuy [Item Order] This console command sets the order in which the game client rebuys your gear. It can be adjusted to give priority to other purchases, such as defuse kits, grenades and more.
cl_sidespeed cl_sidespeed [Speed] This movement console command sets how quickly you can move while running sideways.
inferno_friendly_fire_duration inferno_friendly_fire_duration [Duration] This command sets how long after you've damaged a teammate with a molotov or an incendiary grenade the server tells you that you've damaged someone on your team.
inferno_scorch_decals inferno_scorch_decals [0 / 1] You can use this console command to prevent molotovs and incendiary grenades you throw from leaving scorch decals (scorch marks) on the ground once they burn out.
listissues listissues This useful console command produces a list in your developer console of the different things you can vote for in your server . This includes voting to change the map and voting to kick a player.
m_rawinput m_rawinput [0 / 1] This command enables raw input from your mouse, if set to 1 (default). When raw input is enabled, input is taken directly from your mouse and your operating system settings (like acceleration, delay, etc) will not come into play.
mm_dedicated_search_maxping mm_dedicated_search_maxping [Max Ping] This console command is used to set your max preferred ping when connecting to matchmaking servers. It can be beneficial to adjust this command if you find yourself being put in laggy servers.
mp_buy_allow_grenades mp_buy_allow_grenades [0 / 1] This command sets whether or not players can purchase any form of grenade from the buy menu. Default is 1 (enabled).
mp_buy_anywhere mp_buy_anywhere [0 / 1 / 2 / 3] This command can be used to set whether or not players can access the buy menu when they are outside of the buyzone. Note that they still need to be within the buy time period - you can change the buy time period with mp_buytime.
mp_buy_during_immunity mp_buy_during_immunity [0 / 1 / 2 / 3] This command makes it so that players can buy when they are immune, regardless of the current buy time. This is used commonly in deathmatch servers. See argument information for options. Default is 0 (disabled).
mp_buytime mp_buytime [Seconds] This command sets the amount of time (in seconds) that players have after a round starts to purchase items. This is the time period AFTER the round countdown. So players have the countdown at the start of the round (usually 15 seconds), plus this time period to buy.
mp_c4timer mp_c4timer [Seconds] This command sets how many seconds it takes for the bomb to explode after it has been planted by the terrorists. Default is 40 seconds or 35 seconds, depending on gamemode.
mp_competitive_endofmatch_extra_time mp_competitive_endofmatch_extra_time [Seconds] This command sets the amount of time (in seconds) that the scoreboard will show for (or voting time there will be) after a competitive match ends. Default is 15 seconds.
mp_ct_default_grenades mp_ct_default_grenades [Grenade Code(s)]

This command sets the default grenades that counter terrorists spawn with. Default is none (0). Separate multiple grenades with spaces.

 

Name Syntax Description
mp_ct_default_melee mp_ct_default_melee [Weapon Code(s)] This command sets the default melee weapon that counter terrorists spawn with at the start of the round. Default is weapon_knife.
mp_ct_default_primary mp_ct_default_primary [Weapon Code(s)] This command sets the default primary weapon that counter terrorists spawn with at the start of the round. Default is none (0).
mp_ct_default_secondary mp_ct_default_secondary [Weapon Code(s)] This command sets the default secondary weapon that counter terrorists spawn with at the start of the round. Default is weapon_hkp2000.
mp_death_drop_c4 mp_death_drop_c4 [0 / 1] This command sets whether or not the C4 (bomb) is droppable. Default is 1 (droppable).
mp_death_drop_defuser mp_death_drop_defuser [0 / 1] This command sets whether or not defuse kits are dropped on death. Default is 1 (dropped on death).
mp_death_drop_grenade mp_death_drop_grenade [0 / 1 / 2] This command sets which grenade (if any) to drop when a player is killed. See argument information for help. Default is 1 (their best).
mp_death_drop_gun mp_death_drop_gun [0 / 1 / 2] This command sets which gun should be dropped when a player is killed. Default is 1 (their best).
mp_deathcam_skippable mp_deathcam_skippable [0 / 1] This command sets whether or not the deathcam can be skipped. Default is 1 (skippable).
mp_default_team_winner_no_objective mp_default_team_winner_no_objective [Team] If your map does not have an objective, this command will set who wins the game when the time runs out.
mp_defuser_allocation mp_defuser_allocation [0 / 1 / 2] This command can be used to set whether or not players should receive defusers (for free) at the start of the round, and if so, who should receive the defusers.
mp_disable_autokick mp_disable_autokick [User ID] This command will stop the user with the specified userid from being autokicked. Note that this user id is not their steam ID, the user ID is the number that shows in the "status" command.
mp_display_kill_assists mp_display_kill_assists [0 / 1] This command will set whether or not assists are shown in the killfeed. Default is yes (1).
mp_dm_bonus_length_max mp_dm_bonus_length_max [Seconds] This command sets the maximum duration of the bonus time in deathmatch. A random time between this value and mp_dm_bonus_length_min will be chosen.
voice_scale voice_scale [0 - 1] This command sets the volume of voice communications (i.e. how loud all other players microphones are). Default is 1 (loudest), 0 would mute, 0.5 would be 50% volume.
+use +use This command will prompt you to perform the "use" action on an item or object if its applicable. For example, this command will make you plant the bomb if you're on a bombsite carrying the bomb when you use it. It can also open doors if you're in front of one. It acts in a similar way to the E key on a default keyboard setup. Use the -use command afterwards, as otherwise you will not be able to use this command again.
-use -use If you have previously used the +use command, you must run this command after (to deactivate it), so that you can use the +use command again.
addip addip [Minutes Banned] [IP Address ] This console command bans the specified IP from the server for the specified amount of minutes. Specify 0 as the amount of minutes to ban permanently.
alias alias [Alias] ["Command"] The alias command in CS:GO allows you to assign a longer command or commands to a custom phrase that you enter into your console.
banid banid [Minutes] [User ID] This command will ban the user with the specified ID from the server, and add them to the banlist so that they cannot reconnect. The user ID of a user can be obtained by typing status into the console: the user ID is first number before a player's name in the list of players that is printed by that command.
banip banip [Minutes] [IP Address ] This command is an alias of the "addip" command. This console command bans the specified IP from the server for the specified amount of minutes. Specify 0 as the amount of minutes to ban permanently.
bot_dont_shoot bot_dont_shoot [0 / 1] This command can be used to prevent NPC characters (bots) from being able to fire guns.
bot_kill bot_kill [Kill Criteria] This command kills all of the bots in your selected criteria. Unlike the bot_kick command, this doesn't remove them from server, and means that all killed bots will respawn on the next round.
bot_knives_only bot_knives_only [0 / 1] This console command forces all bots on the server to use knives.
cl_backspeed cl_backspeed [Movement speed] This console command changes how quickly your character runs backwards.
cl_bobamt_lat cl_bobamt_lat [Value] This console command adjusts how much your viewmodel & gun barrel moves side to side when you're running.
cl_cmdrate cl_cmdrate [Packets sent] This command sets the max number of command packets that are sent from your client to the CS:GO servers each second.
cl_crosshairdot cl_crosshairdot [0 / 1] This command adds a dot in the center of your crosshair. If you reduce cl_crosshairsize to 0, you can set it so you only have a dot.
cl_scoreboard_mouse_enable_binding cl_scoreboard_mouse_enable_binding [Bind Key] This command allows you to change what key turns mouse selection on while you have the scoreboard open . This is defaulted to +attack2 (usually right-click), and is what lets you use your mouse to click on people's names when you toggle open the scoreboard.
cl_spec_mode cl_spec_mode [0 / 1] This useful console command is used to save your most recent spectator mode and settings for the next time you spectate a game.
cl_wpn_sway_scale cl_wpn_sway_scale [Sway Value] This fun command adjusts how much your gun sways when you look around with the camera. On law values the weapon will hardly move, and at high values a slight movement will have your gun flying around.
demo_gototick demo_gototick [Tick] Forces the demo you're watching to skip to a certain tick.
exit exit This command will quit your game.
inferno_max_flames inferno_max_flames [Max Flames] This command is used to set the maximum number of flames that can be created from a single molotov or an incendiary grenade.
inferno_per_flame_spawn_duration inferno_per_flame_spawn_duration [Time] This command is the time in seconds that each new flame in an incendiary grenade or molotov will try to create new flames.
invnext invnext This command switches to the next item in your inventory. If you have your rifle equipped it will swap to your pistol, and if you have your pistol equipped it will swap you to your knife.
invnextgrenade invnextgrenade This command switches what you have equipped to the next grenade in your inventory. That means if your rifle is drawn you will switch to a grenade, and then using the command again will cycle you through to the next available grenade on you.
invnextitem invnextitem This command switches to the next item in your inventory. This does not include guns, so will move between items such as your knife and grenades only.
invnextnongrenade invnextnongrenade This command equips the next item in your inventory that isn't a grenade. It also ignores knives, so will only switch between the guns you have in your inventory.
invprev invprev This command works backwards through your inventory, equipping you with the item that is the previous selection of what you currently have out. That means that using this command when you have your knife out equips your pistol, and using it with your pistol out equips your rifle (if you have one).
m_pitch m_pitch [Y Sensitivity] This command controls the sensitivity of your Y axis . That means it only adjusts your look sensitivity when looking up or down.
m_yaw m_yaw [X Sensitivity] This console command is used to adjust your mouse sensitivity only on the X axis , which is looking left/right.
mp_give_player_c4 mp_give_player_c4 [0 / 1] This command sets whether or not a player (on T side) should be given a bomb at the start of the round. Default depends on gamemode, for demolition gamemodes, this setting is enabled (1).
sv_maxvelocity sv_maxvelocity [Speed] This command sets the maximum speed any moving object in the game can reach. Default is 3500. Use sv_maxspeed for player speed.
player_nevershow_communityservermessage player_nevershow_communityservermessage [0 / 1] This console command is used to toggle between whether you want to show the custom message whenever you join a community server that has one.
+showscores +showscores This command will make the in game scoreboard appear. Unlike holding TAB, it will stay on your screen without you needing to press anything. Disable it with the -showscores command.
+zoom +zoom This command will make make your AWP, or any other weapon with a scope (e.g. scout) scope in. The weapon will continue to be scoped in/out until the command -zoom is used. The command may activate the "zoom" feature of other weapons like the stab of a knife or the burst fire switch of the glock.
-score -score This command hides the CS:GO scoreboard if you brought it up with a command like +score.
-showscores -showscores This command dismisses the scoreboard if you've brought up it permanently through a command like +showscores or +score.
bot_freeze bot_freeze [0 / 1] This cheat command prevents bots (NPC characters) from being able to move.
bot_loadout bot_loadout [Weapon Codes] This command sets what bots in your server will spawn with, such as particular weapon and grenade setups.
bot_max_vision_distance_override bot_max_vision_distance_override [-1 / 1] This command overides the max distance value that bots are set, meaning they will or won't (depending on setting) be able to see you from much further across the map than usual.
bot_mimic bot_mimic [0 / 1] This command, if enabled (set to 1), will make all bots relay your actions. If you jump, all bots will jump, if you shoot, all bots will shoot, etc.
bot_stop bot_stop [0 / 1] This command, if set to 1, causes bots to stop what they're doing. This means they will stop moving, shooting and all other processes until you turn the command off (by setting it to 0, which is default).
callvote callvote This command brings up the option to call a vote in game, either to kick a player or to change map. You can select which vote you're calling after entering the command, and if the vote you call then receives a large majority of player votes to one side or another that decision is forced (e.g. the player you're voting to kick would be kicked if the large majority of players voted yes).
changelevel changelevel [Map Name] This command is used to change the map you're playing on.
cl_crosshair_dynamic_maxdist_splitratio cl_crosshair_dynamic_maxdist_splitratio [Ratio] This console command is what determines the ratio of the inner and outer lines when using the cl_crosshairstyle 2 command.
cl_crosshair_dynamic_splitalpha_innermod cl_crosshair_dynamic_splitalpha_innermod [Alpha Value] When using cl_crosshairstyle 2, this is the command that adjusts the transparency of the inner crosshair.
cl_crosshair_dynamic_splitalpha_outermod cl_crosshair_dynamic_splitalpha_outermod [Alpha Value] When using cl_crosshairstyle 2, this is the command that adjusts the transparency of the outer crosshair.
cl_crosshair_dynamic_splitdist cl_crosshair_dynamic_splitdist [Value] When using cl_crosshairstyle 2, this command sets how far apart the two crosshairs move apart when your character model moves.
cl_disablefreezecam cl_disablefreezecam [0 / 1] This console command is used to disable the freezecam that replays your death to you in certain servers. Some players choose to remove it to save time and reduce tilt.
cl_hud_background_alpha cl_hud_background_alpha [Alpha Value] This console command adjusts how transparent some areas of your HUD (heads up display) appear on your screen. An example of this is how visible the shaded box is behind your current amount of money to the left of your screen.
cl_hud_bomb_under_radar cl_hud_bomb_under_radar [0 / 1] This command toggles whether or not your HUD (heads up display) includes the image of a bomb underneath your radar whenever you are carrying the bomb.
cl_resend cl_resend [Wait time] This command sets the amount of time the game client will wait before resending a connection attempt, should the previous one have failed.
cl_show_clan_in_death_notice cl_show_clan_in_death_notice [0 / 1] This console command determines whether or not a player's clan tag shows up in your kill feed. By default this is turned on, but it can be turned off.
inferno_flame_spacing inferno_flame_spacing [Spacing] This console command changes the distance between separate flame spawns when using molotov and incendiary grenades.
joystick_force_disabled_set_from_options joystick_force_disabled_set_from_options [0 / 1] Sets external controllers you've connected to the game enabled or disabled, depending on the command's setting. This command manually changes the selected option for whether controllers are enabled in the game settings, too.
key_findbinding key_findbinding [Bind Key] This console command produces a list in your developer console of what certain keys are bound to, such as the B key on your keyboard being bound to opening the buy menu.
kick kick [Username] This command is used to kick, or to vote to kick, a certain player in the game, that you specifiy by entering their username.
kill kill This command will kill your character instantly, whatever health they are on.
m_customaccel m_customaccel [0 / 1 / 2 / 3] This command is used to choose what level of custom mouse acceleration you have. It can be set to disabled, or from a couple of choices.
m_customaccel_exponent m_customaccel_exponent [Start Point] This is the command that sets what speed you need to be moving your mouse before the custom mouse acceleration kicks in, if you have that command enabled too.
m_customaccel_max m_customaccel_max [Max Point] This is the console command that determines the limit for how fast your mouse can move depending on how fast you're moving it in real life. It can be set to have no limit.
m_customaccel_scale m_customaccel_scale [Scale] This is the command that determines what the value is for the custom mouse acceleration command. The higher this is, the faster your mouse acceleration will be.
m_mouseaccel1 m_mouseaccel1 [Value] This console command sets the mouse acceleration value for its initial threshold, up to 2x movement speed.
m_mouseaccel2 m_mouseaccel2 [Value] This console command sets the mouse acceleration value for its second threshold, up to 4x movement speed.
m_mousespeed m_mousespeed [0 / 1 / 2] This is the command used to set your preferences for Windows mouse acceleration.
mp_halftime mp_halftime [0 / 1] This command sets whether or not teams are switched at half time. Default is 1, which is enabled.
mp_halftime_duration mp_halftime_duration [Seconds] This command sets the duration of half time, in seconds.
unbindall unbindall This command removes all binds from all keys. Note that this will remove binds from keys like W, A, S and D, so you won't be able to move until re-binding.
bot_kick bot_kick [Kick Criteria] This console command is used to kick bots from the server. You can select from kicking all bots, a certain team's bots, or only bots of a certain difficulty depending on what values you enter with the command.
bot_place bot_place This will spawn a bot on your server based on where your player model is standing. You don't need to add anything additional to this command - its plain form will spawn a bot in front of you. You sometimes need to enter this command a few times for it to place a bot.
buddha buddha Entering this command toggles buddha mode on and off. Buddha mode means that you still take damage when shot, but you can't die. When you reach 0 hp your health bar will show 1 hp, no matter how much you keep getting shot. It works very similarly to the "god" command to toggle god mode.
buyrandom buyrandom This console command purchases a random primary and secondary weapon. You do need the funds to make the purchase though, meaning this command is mainly used in deathmatch and other servers where you have unlimited money.
cash_player_killed_enemy_factor cash_player_killed_enemy_factor [Money Earned/Lost] This command sets how much money is earned or lost by killing an enemy player with one of the main weapons (default pistols, primary rifles like the AK/M4, etc)
cl_crosshairusealpha cl_crosshairusealpha [0 / 1] Adjusts the transparency of your crosshair.
cl_disable_ragdolls cl_disable_ragdolls [0 / 1] This command is used to turn ragdolling off, something that can sometimes cause dead bodies to behave weirdly as it attempts to display the animation in a more detailed way.
cl_drawhud cl_drawhud [0 / 1] This command can be used to completely hide all features of your HUD (heads up display) or to enable them to show again.
cl_maxrenderable_dist cl_maxrenderable_dist [Render Distance] This command allows you to set the max distance from the camera that an object can be rendered onto your screen.
cl_radar_square_with_scoreboard cl_radar_square_with_scoreboard [0 / 1] This command decided whether the radar is a square or a circle whenever you toggle the scoreboard open.
cl_showhelp cl_showhelp [0 / 1] This console command controls showing on-screen help tips while you're in game. You can turn this off in the settings menu and also with this command.
cl_spec_stats cl_spec_stats [0 / 1] This command is used to hide or show stats in spectator mode, something many observers choose to hide.
crosshair crosshair [0 / 1] You can use this console command to toggle whether or not your crosshair is visible in game.
demo_listhighlights demo_listhighlights This command produces a list of the highlights data extracted from the demo you're watching. Data will be pasted into your developer console.
demo_listimportantticks demo_listimportantticks Use this command for a list of the ticks that the game client determined to be important in a specific demo.
rcon rcon [Command] This command will issue the specified rcon command (i.e. issues the specified command on your server). Rcon means remote console - it allows you to execute server commands from the client.
rcon_address rcon_address [IP Address] The IP address of the remote console you wish to connect to (default is the address of your own server). Change this only if the rcon address for the server you are connected to is different from the server's IP.
rcon_password rcon_password [Password] This command will authenticate you for rcon with the specified password.
sv_noclipspeed sv_noclipspeed [Multiplier] This command sets the speed multiplier for noclip mode. With this set to 5 (default) you can reach speeds 5 times as fast as those set by sv_maxspeed.
voice_forcemicrecord voice_forcemicrecord [0 / 1] This command, if set to 0, will make CS:GO not use your operating system's device set as the default microphone device.
voice_loopback voice_loopback [0 / 1] This command, if set to 1, will make your microphone playback via your speakers (i.e. you will hear your microphone). Default is 0 (disabled). Usually there is a little delay, this is normal.
Name Syntax Description
voice_threshold voice_threshold [Threshold] This command sets the volume theshold at which your microphone will be enabled if you are using voice activation. In other words, when your microphone is louder than this value, it will be transmitted in-game.
bot_allow_grenades bot_allow_grenades [0 / 1] This command, if set to 1, allows bots to use grenades. Default is 1, set to 0 to disallow.
bot_allow_machine_guns bot_allow_machine_guns [0 / 1] This command, if set to 1, allows bots to use machine guns. Default is 1, set to 0 to disallow.
bot_allow_pistols bot_allow_pistols [0 / 1] This command, if set to 1, allows bots to use pistols. Default is 1, set to 0 to disallow.
bot_allow_rifles bot_allow_rifles [0 / 1] This command, if set to 1, allows bots to use rifles. Default is 1, set to 0 to disallow.
bot_allow_rogues bot_allow_rogues [0 / 1] This command, if set to 1, allows bots to "go rogue" randomly, when bots are rogue, they don't respond to radio commands. Default is 1, set to 0 to disallow.
bot_allow_shotguns bot_allow_shotguns [0 / 1] This command, if set to 1, allows bots to use shotguns. Default is 1, set to 0 to disallow.
bot_allow_snipers bot_allow_snipers [0 / 1] This command, if set to 1, allows bots to use sniper rifles. Default is 1, set to 0 to disallow.
bot_allow_sub_machine_guns bot_allow_sub_machine_guns [0 / 1] This command, if set to 1, allows bots to use SMGs. Default is 1, set to 0 to disallow.
bot_coop_force_throw_grenade_chance bot_coop_force_throw_grenade_chance [0 - 1] This command sets the chance a bot has of forcefully throwing a grenade in a coop mission.
bot_coop_idle_max_vision_distance bot_coop_idle_max_vision_distance [Distance] This command sets the maximum distance at which bots can see enemies in cooperative missions when they are idle, dormant, hiding or asleep.
bot_ignore_players bot_ignore_players [0 / 1] [0 / 1] This command, if set to 1, will make bots be unable to see/react to players that aren't bots. Default is 0 (disabled).
cameraman_override cameraman_override [0 / 1] This command (if set to 1) will make you override the primary camera man, provided you are the secondary camera man.
mp_damage_headshot_only mp_damage_headshot_only [0 / 1] Turning this command on means that damage to other players can only be done through headshots. Time to test your aim.
+alt1 +alt1 This command activates the ALT1 (left ALT) key on your keyboard (the same as holding down the ALT key). Use -alt1 to deactivate.
+alt2 +alt2 This command activates the ALT2 (right ALT) key on your keyboard (the same as holding down the ALT key). Use -alt2 to deactivate.
+attack +attack This console command causes you to attack repeatedly. Use the command -attack to stop this. If you have a gun equipped while using this command it will make you fire until you need to reload.
+attack2 +attack2 This command will activate your secondary attack repeatedly. To stop this, use the -attack2 command. For example, this command makes you scope in with an AWP, or stab if you have your knife out.
+back +back This command will make your character move backwards continuously. Type -back into your console to disable this.
+break +break This command wil activate the break key on your keyboard. Usually called "Pause / Break". This command does not work with most keyboard formats.
+duck +duck This movement console command will make your character crouch, similarly to how holding the left CTRL key on a keyboard works. -duck will make you stand up again.
+forward +forward This movement command makes your character move forward infinitely. Use -forward to disable this.
+graph +graph This console command brings up a graph on your screen displaying stats like FPS, ping and choke. It is similar to using your net graph.
+jump +jump This movement command causes your character to jump once into the air. It will also unbind your jump key, so enter -jump into your console to fix this.
+movedown +movedown This command only works in noclip mode and in demos: this command will make you (or your free-roam camera in demos) move downwards. Use -movedown to stop moving downwards.
+moveleft +moveleft This command will make your character move to the left. The -moveleft console command will stop your character from moving to the left after running this command.
+moveright +moveright This command will make your character move to the right. The -moveright console command will stop your character from moving to the left after running this command.
+moveup +moveup This command only works in noclip mode and in demos: this command will make you (or your free-roam camera in demos) move upwards. Use -moveup to stop moving upwards.
+reload +reload This command will prompt your character to reload their weapon if any bullets have been fired, and if not deactivated, will cause your character to reload instantly after firing a single bullet. Deactivate this command with the -reload command.
+right +right This command makes your camera spin endlessly to the right. Using the command -right will stop this effect.
+score +score This command will bring up the match scoreboard that displays statistics such as kills, deaths, and how many MVP medals each player has. Use the command -score to hide the scoreboard.
-alt1 -alt1 This command will deactivate the alt1 key, which is usually activated with the +alt1 command.
-alt2 -alt2 This console command stops the action that the command +alt2 commands.
-attack -attack This is the command needed to stop firing or attacking if you've the +attack command.
-attack2 -attack2 This is the command you need to stop the infinite attack cycle that +attack2 causes, such as repeatedly stabbing if you have your knife equipped.
-back -back Using this console command stops your character walking backwards if you previously used the +back command.
-duck -duck If you're crouched, this cheat command will make you stand back up.
-forward -forward This is the command to use to stop your character walking forward if you've got them in an endless movement cycle.
-graph -graph This cheat command will dismiss the statistics graph that can be summoned by using the +graph command.
-movedown -movedown This command will deactivate the +movedown command (will stop you or your camera from moving downwards).
-moveleft -moveleft This cheat command stops your character from moving if they've been set to move endlessly to the left.
-moveright -moveright This command prevents your character from moving any further if they've been set to move endlessly to the right.
-moveup -moveup This command will deactivate the +moveup command (will stop you or your camera from moving upwards).
-reload -reload This command will deactivate the +reload command (as after using the +reload command, you will instantly reload after firing any bullets).
-right -right This console command stops your camera from spinning in circles if you've set it to rotate endlessly to the right.
-speed -speed This command will return the speed of your character back to running speed/normal if you've slowed it down with a command like +speed.
-strafe -strafe This command disables the effect from the +strafe command, where your mouse will move your character sideways rather than look around with the camera.
-zoom -zoom This command breaks the infinite loop cycle of scoping in and out on a scoped weapon like the AWP or stabbing with your knife that +zoom causes.
bot_crouch bot_crouch [0 / 1] This command, if set to 1, will make all bots in the game crouch. Set to 0 to disable.
bot_join_team bot_join_team [T / CT / Any] This console command is used to set which team bots should join when adding more to a server with the "bot_add" command. You can choose between Terrorist side, Counter-Terroists or any team.
bot_quota_mode bot_quota_mode [Mode] The mode that the number of bots should be controlled by. Options are: normal, fill and match. Normal is normal behaviour. Fill will fill the server with as many bots as "bot_quota" is set to. Match will keep a 1 human : bot_quota ratio of bots.
bot_randombuy bot_randombuy [0 / 1] This command clears the preference settings of what bots are programmed to buy, and instead casues them to purchase items randomly with the money they have.
bot_snipers_only bot_snipers_only This cheat command restricts bots to only be able to use sniper rifles, such as the AWP.
bot_zombie bot_zombie [0 / 1] Puts bots into zombie mode, causing them idle and not to attack or fire their guns.
buymenu buymenu This command will show or hide the buy menu, as long as you are standing in the buy zone and are within the time limit to buy items. It works similarly as pressing B on a default keyboard setup.
c_maxdistance c_maxdistance [Maximum distance] This command controls how far away your camera be at a maximum from your camera in third person mode. Set c_mindistance to the same value to avoid third person camera stuttering.
c_mindistance c_mindistance [Minimum distance] This command controls how close the minimum distance your camera can be away from your character when in third person mode. Set c_maxdistance to the same value to avoid third person camera stuttering.
cash_team_elimination_bomb_map cash_team_elimination_bomb_map [Money Earned/Lost] This console command sets how much money each team member earns when they eliminate all 5 enemies in a bomb defusal map , like Mirage or Dust II.
cl_bobup cl_bobup [Value] Adjusts how much your viewmodel & weapon bobs up when running.
cl_fixedcrosshairgap cl_fixedcrosshairgap [Gap] This console command alters the gap inbetween the pips (the four lines that form a crosshair) when using the fixed crosshair.
cl_freezecameffects_showholiday cl_freezecameffects_showholiday [0 / 1] This command is used to set whether or not the freezecam (kill cam) is decorated in a festive theme, such as with snow around to commemorate Christmas.
cl_showloadout cl_showloadout [0 / 1] Use this console command to toggle between showing your current loadout or not. This includes your weapons and grenades that show up in the bottom left of your screen.
cl_spec_follow_grenade_key cl_spec_follow_grenade_key [0 / 1 / 2] This console command is used by observers or anybody spectating the game. It assigns a key that you can press to follow the trajectory of a grenade as it's being thrown.
cl_spec_show_bindings cl_spec_show_bindings [0 / 1] You can use this console command in spectator mode to toggle a list of the spectator binds that are possible to set up.
getpos getpos This command would print your current location to the console (both position and camera angle) as setpos and setang commands. Using these commands will return you to the position you are at when you typed the getpos command.
getpos_exact getpos_exact This command would print to the console your origin and camera angle to the console.
inferno_initial_spawn_interval inferno_initial_spawn_interval [Time] This command sets how long it takes for a molotov or incendiary grenade to bloom out and reach its maximum spread. If you set this value higher than the time the molotov is active, it will never reach its full size and stay contained to just a small section of where you threw it.
inferno_max_child_spawn_interval inferno_max_child_spawn_interval [Time] Use this command to set the longest period of time that can pass before a molotov or incendiary grenade's child flames spawn.
joy_sidesensitivity joy_sidesensitivity [Sensitivity] This is a joystick command that sets what sensitivity your sideways camera movement uses. The higher you set this value, the less you need to move the joystick to look sideways.
load load [Game Name] This command allows you to load a saved file. You can use this when you're not in multiplayer to bring up a demo file of yours or something similar.
writeid writeid This command saves the list of user IDs that have been banned to banned_user.cfg, so that the bans apply even after the server restarts.
writeip writeip This command saves the list of IPs that have been banned to banned_ip.cfg, so that the bans apply even after the server restarts.
mp_buy_allow_guns mp_buy_allow_guns [1 / 2 / 4 / 8 / 16 / 32 / 255] This console command adjusts the rules in your server on what guns players can purchase.
+speed +speed This console command will slow down the movement speed of your character. Type the command -speed to return your movement speed back to normal.
+strafe +strafe This command prevents your mouse from being able to adjust where your player model is looking. Instead, your mouse will cause you to move to the side, or strafe. Turn this off with the -strafe command.
+voicerecord +voicerecord This a useful console command that, when activated, will start continuously transmitting what you say to your teammates in game, meaning you don't need to hold down a mic hotkey. The command -voicerecord disables this command and stops transmitting what you say to your team. Check our examples for a way to bind this to a key.
-voicerecord -voicerecord This console command will stop transmitting voice communication if you've used a command that lets you communicate without holding down a hotkey. Check the examples for a bind to toggle between transmitting voice and not doing so.
ammo_338mag_max ammo_338mag_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .338 MAG ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level. This ammo is used only by the AWP.
ammo_357sig_max ammo_357sig_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .357 SIG ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level. This ammo is used by the: P228, P250 and P2000. The P250, however, has a value that's set/overriden by the ammo_357sig_p250_max command.
ammo_357sig_min_max ammo_357sig_min_max [Maximum Amount] This command sets the clip size (amount of bullets before you need to reload) for guns with .357 SIG ammo. If this value is lower than the default, this is the amount you will receive in your clip when you respawn with, or buy guns with this ammo. If higher than the default, you will need to top-up your clip with the givecurrentammo command.
ammo_357sig_p250_max ammo_357sig_p250_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for the P250 (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_357sig_small_max ammo_357sig_small_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .357 SIG ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level. This ammo is used by the: P228, P250 and P2000. The P250, however, has a value that's set/overriden by the ammo_357sig_p250_max command.
ammo_45acp_max ammo_45acp_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .45 ACP ammo (the amount of extra bullets you carry to reload with). This is also the amount of ammo that you will respawn with/receive when you buy a gun. This ammo is used by the: MAC-10, UMP45 and the USP-S. The USP-S, however
ammo_50AE_max ammo_50AE_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_556mm_box_max ammo_556mm_box_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_556mm_max ammo_556mm_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_556mm_small_max ammo_556mm_small_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_57mm_max ammo_57mm_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_762mm_max ammo_762mm_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_9mm_max ammo_9mm_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with .50 AE ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_buckshot_max ammo_buckshot_max [Maximum Amount] This command sets the maximum amount of ammo you can carry for guns with buckshot ammo (the amount of extra bullets you spawn with/receive when you buy a gun, that you can reload with). If this value is lower than the default amount, you will spawn with this amount of extra ammo. If this is higher than the default amount that you spawn with, you will need to use the givecurrentammo command to top your ammo up to its new maximum level.
ammo_grenade_limit_default ammo_grenade_limit_default [Maximum Amount] This command sets the amount of any grenade type that isn't a flashbang you can carry at a given time, provided you have room in your grenade slots. With this at 1 (default) you could carry only 1 HE grenade at any given time, with this at 2, you could carry 2 HE grenades at any given time, etc.
ammo_grenade_limit_flashbang ammo_grenade_limit_flashbang [Maximum Amount] This command sets the maximum amount of flashbangs you can buy/carry at any given time.
ammo_grenade_limit_total ammo_grenade_limit_total [Maximum Amount] This command sets the maximum total amount of grenades you can carry at any given time. With this at 3, you can only carry a total of three grenades at any given time.
bot_all_weapons bot_all_weapons Using this command will allow bots on a private server to use all weapons if the option to do so has been disabled.
bot_chatter bot_chatter [Value] This command sets the rules for what the bots can say in game. Possible values are "off", "radio", "minimal", or "normal".
bot_show_battlefront bot_show_battlefront [0 / 1] This command highlights the areas of the map where rushing bots (and players if they run straight from spawn) from both teams will encounter each first. This is areas such as A Ramp and the Window in mid on Mirage. It can be useful to see where you will encounter enemies when rushing, though it does need cheats enabled.
bot_traceview bot_traceview This command, if enabled (set to 1), will enable "traceview" debug features, in which bots "tracers" (the line of their sight) will be drawn on your screen.
cash_player_bomb_defused cash_player_bomb_defused [Money Earned/Lost] This command changes how much money a player earns for defusing the bomb. It can't give more than the max amount of money you can hold in a specific server.
cash_player_bomb_planted cash_player_bomb_planted [Money Earned/Lost] This cheat command alters how much money a player gets for planting the bomb. You can't earn more than the max money on a specific server.
Name Syntax Description
cash_player_killed_teammate cash_player_killed_teammate [Money Earned/Lost] This cheat command sets how much money is earned or lost for killing a teammate.
cash_player_rescued_hostage cash_player_rescued_hostage [Money Earned/Lost] Sets the money earned or lost for rescuing a hostage safely in hostage mode.
cash_team_elimination_hostage_map_ct cash_team_elimination_hostage_map_ct [Money Earned/Lost] This console command sets how much money each team member earns on the CT side when they eliminate all 5 Terrorists on a hostage map.
cash_team_elimination_hostage_map_t cash_team_elimination_hostage_map_t [Money Earned/Lost] This command sets how much money each Terrorist earns for winning a round in a hostage map by elimination.
cash_team_hostage_alive cash_team_hostage_alive [Money Earned/Lost] This command sets the amount of money earned or lost for a hostage surviving a round. The default is $0.
cash_team_hostage_interaction cash_team_hostage_interaction [Money Earned/Lost] This console command chooses how much money is earned or lost for a player interacting with a hostage.
cash_team_loser_bonus cash_team_loser_bonus [Money Earned/Lost] This command sets the base cash earned by a team for losing a round. This then rises in set increments, which is controlled by a separate command.
cash_team_loser_bonus_consecutive_rounds cash_team_loser_bonus_consecutive_rounds [Money Earned/Lost] This console command sets the cash increase for a string of losses to climb by. Having this value at $500 (default) means each consecutive lost round awards $500 more than the previous to the losing team, up until 5 lost rounds in a row.
cash_team_planted_bomb_but_defused cash_team_planted_bomb_but_defused [Money Earned/Lost] This command sets the amount of money the Terrorist team earns for planting a bomb that is ultimately defused. This stacks along with the round loss bonus. The default value is $800.
cl_clanid cl_clanid This console command will generate a unique ID based on the current clan tag you have active. If you aren't displaying a clan tag, the command won't do anything.
cl_dm_buyrandomweapons cl_dm_buyrandomweapons [0 / 1] When this command is enabled, each time you spawn in deathmatch you will have a random weapon.
cl_freezecampanel_position_dynamic cl_freezecampanel_position_dynamic [0 / 1] This command adjusts whether freezecams (kill cams) show movement in its kill panel. By default this is set to on.
cl_game_mode_convars cl_game_mode_convars Use this command to produce a list of the active convars in your current game server, such as bot difficulty and the game mode you're playing.
cl_jiggle_bone_debug cl_jiggle_bone_debug [0 / 1] This command shows the player debugging information related to the bone physics in NPCs and other character models. It will create light beams showing how each bone is working at that time, so is useful for fixing issues with physics.
cl_observercrosshair cl_observercrosshair [0 / 1] This is the console command that controls whether or not you have a crosshair when spectating/observing players.
cl_ragdoll_gravity cl_ragdoll_gravity [Gravity Value] This console command dictates the gravity that controls the physics of ragdolls (death animations).
cl_reload_hud cl_reload_hud This command is used to reset the HUD scale back to default, and tweaks the border settings back to their original value.
clear_anim_cache clear_anim_cache This command wipes (clears) the animation cache, which frees up its memory until the next time you need to streaming animblock.
clear_debug_overlays clear_debug_overlays This command is used to wipe (clear) all the debug overlays active.
demolist demolist Prints the demo sequence list in your developer console for you to see.
demos demos This command returns you to the homescreen of CS:GO, though in some cases it can crash your game .
inferno_spawn_angle inferno_spawn_angle [Degrees] This console command adjusts the angle from which child flames burn to their parent. You can use it to edit slightly the way that molotovs spread when they burn.
inferno_surface_offset inferno_surface_offset [Offset] This command edits the surface offset used in incendiary grenades and molotovs when they hit the ground and begin burning.
joy_response_move joy_response_move [0 / 1 / 2 / 3 / 4 / 5] This console command sets the movement stick reponse mode on a joystick.
key_updatelayout key_updatelayout Use this console command to update your in game keyboard layout to match your current keyboard layout on windows.
light_crosshair light_crosshair This command prints the luxel value of your crosshair in the console.
listdemo listdemo When in a demo file, putting this command into your console will show you a list of the contents in this particular demo.
slot0 slot0 This command switches your active slot (what you are holding in your hand) to slot 0.
slot1 slot1 This command switches your active slot (what you are holding in your hand) to slot 1.
slot10 slot10 This command switches your active slot (what you are holding in your hand) to slot 10.
slot11 slot11 This command switches your active slot (what you are holding in your hand) to slot 11.
slot2 slot2 This command switches your active slot (what you are holding in your hand) to slot 2.
slot3 slot3 This command switches your active slot (what you are holding in your hand) to slot 3.
slot4 slot4 This command switches your active slot (what you are holding in your hand) to slot 4.
slot5 slot5 This command switches your active slot (what you are holding in your hand) to slot 5.
slot6 slot6 This command switches your active slot (what you are holding in your hand) to slot 6.
slot7 slot7 This command switches your active slot (what you are holding in your hand) to slot 7.
slot8 slot8 This command switches your active slot (what you are holding in your hand) to slot 8.
slot9 slot9 This command switches your active slot (what you are holding in your hand) to slot 9.
voice_mute voice_mute [Player #] This command mutes the user with the specified ID. Find the ID of a user with the voice_show_mute command.
voice_show_mute voice_show_mute This command prints a list of players (with their player #s) who can be muted.
voice_unmute voice_unmute [Player #] This command unmutes a player who you have previously muted with the voite_mute command. Use voice_reset_mutelist to reset all mutes.
mp_anyone_can_pickup_c4 mp_anyone_can_pickup_c4 [0 / 1] This console command allows any player, T or CT, to pick up the C4 if it's on the ground.
mp_c4_cannot_be_defused mp_c4_cannot_be_defused [0 / 1] This console command sets whether or not the C4 can be defused once it has been planted.
mp_consecutive_loss_max mp_consecutive_loss_max [Rounds Lost] This command is used to set how many rounds in a row it takes for teams to start earning the max loss bonus.
mp_coop_force_join_ct mp_coop_force_join_ct [0 / 1] When this command is turned on, whenever a real player joins the server (not a NPC), they will auto join the CT side.
mp_coopmission_bot_difficulty_offset mp_coopmission_bot_difficulty_offset [Offset] This command sets the difficulty offset modifier for bots during co-op missions only.
mp_death_drop_taser mp_death_drop_taser [0 / 1] This console command is used to decide whether or not the taser (zeus) is dropped when a player dies.
+camdistance +camdistance Third person mode only command. This command will put your client in "cam distance mode", when in cam distance mode, moving your mouse will zoom the camera in and out (changing the camera distance).
+camin +camin Third person mode only command. This command will zoom your camera as close-in as it possibly can zoom to your player (or the player you're spectating).
+cammousemove +cammousemove This command will stop your mouse movements from controling your player, allowing you to move the camera to a different position. For example, you could move the camera in front of the player after enabling this command: if this command was not enabled, your player would rotate as you move your mouse. Use -cammousemove to re-activate normal behaviour.
+camout +camout Third person mode only command. This command will move your camera as far out as it possibly can be from your character (or the player you're spectating). Use -camout to revert to normal.
+campitchdown +campitchdown Third person mode only. This command will set your camera's pitch value (the pitch axis, aka the up/down axis) to its lowest possible value, making your camera face the player from the ground. Use -campitchdown to restore to normal.
+campitchup +campitchup Third person mode only. This command will set your camera's pitch value (the pitch axis, aka the up/down axis) to its highest possible value, making your camera face the player from the sky. Use -campitchup to restore to normal.
+camyawleft +camyawleft Third person mode only. This command will rotate your camera in a leftwards direction around your character along its yaw axis (left/right). Use -camyawleft to restore to normal.
+camyawright +camyawright Third person mode only. This command will rotate your camera in a rightwards direction around your character along its yaw axis (left/right). Use -camyawright to restore to normal.
+commandermousemove +commandermousemove This command will move the mouse of the Commander from the "Weapons Course", which has since been removed from the game.
+jlook +jlook This console command allows you to use a joystick to move your camera.
+klook +klook This command prevents you from being able to move forward with your keyboard. Use the -klook command to disable it.
+left +left This command causes your camera to endlessly rotate in a left direction. Using the -left command will end the cycle.
+mat_texture_list +mat_texture_list Toggles a display of the textures in the game. This command can frequently crash your CS:GO client, so use with caution.
+showbudget +showbudget This console command brings up a display panel on your screen that displays various technical statistics about CS:GO and your network. Entering -showbudget will hide the panel.
+showbudget_texture +showbudget_texture Using this cheat command brings up a display on the left side of your screen that displays statistics about your game textures on a per frame basis. These include skybox textures, world textures and more. -showbudget_texture will hide this graph.
+showbudget_texture_global +showbudget_texture_global This command will summon a technical display onto your screen giving you detailed statistics on textures in CS:GO. You can dismiss is with the -showbudget_texture_global command.
+showvprof +showvprof This cheat command will cause you to open the VPROF display in CS:GO, giving you statistics on the game, world rendering and displacement rendering. Hide it with the command -showvprof.
+vgui_drawtree +vgui_drawtree This console command causes a graph to appear on the right side of your screen display an assortment of technical statistics about CS:GO's rendering and popups. The command -vgui_drawtree will hide the display.
-break -break This command wil activate the break key on your keyboard. Usually called "Pause / Break". This command does not work with most keyboard formats.
-camdistance -camdistance Third person mode only command. This command will take your client out of "cam distance mode", when in cam distance mode, moving your mouse will zoom the camera in and out (changing the camera distance). By disabling this mode, your mouse will control the angle/rotation of the camera around the player.
-camin -camin Third person mode only command. This command zoom your camera back to its original position, if you have previously ran the "+camin" command.
-cammousemove -cammousemove Provided you have previously used the +cammousemove, this command will make your player be controlled by your mouse movements (as well as the camera) again.
-camout -camout Provided you have previously used the +camout command, this command will restore your camera to its previous position.
-campitchdown -campitchdown This command will restore your camera to its previous position, provided you have previously ran the +campitchdown command.
-campitchup -campitchup This command will restore your camera to its previous position, provided you have previously ran the +campitchup command.
-camyawleft -camyawleft This command will stop your camera from attempting to move left as a result of the +camyawleft command.
-camyawright -camyawright This command will stop your camera from attempting to move rightas a result of the +camyawright command.
-commandermousemove -commandermousemove This command will stop the mouse of the commander (from the Weapons Course) moving.
-jlook -jlook This cheat command can be used to prevent a joystick that you may have plugged into your computer from being able to adjust where the in game camera is looking.
-jump -jump This command will deactivate the effect of the +jump command.
-klook -klook This command will allow you to move forward using your keyboard if you've purposefully or accidentally disabled that function.
-left -left This is the console command that will stop your camera from rotating to the left on an unlimited loop, such as the command +left does.
-mat_texture_list -mat_texture_list This command hides the display of CS:GO textures that +mat_texture_list brings up. Both commands can frequently cause CS:GO to crash though, so use carefully.
-showbudget -showbudget This command is used to dismiss the show budget graph that is brought up with the command +showbudget.
-showbudget_texture -showbudget_texture This is the command used to dismiss the statistics panel that +showbudget_texture summons.
-showbudget_texture_global -showbudget_texture_global This console command is what will dismiss the panel that +showbudget_texture_global will put on your screen.
-showvprof -showvprof Hides the graph produced when using the +showvprof command.
-vgui_drawtree -vgui_drawtree This command dismisses the display produced by the +vgui_drawtree.
_autosave _autosave This command saves your game in certain single-player instances of CS:GO.
_bugreporter_restart _bugreporter_restart This command restarts the bug reporter .dll
_resetgamestats _resetgamestats This console command will wipe your current game stats and start a new file for you, so don't use if you want to keep your stats in tact.
achievement_debug achievement_debug [0 / 1] When sv_cheats 1 is on this command will turn on achievement debug messages.
achievement_disable achievement_disable [0 / 1] This console command turns off in-game achievements in CS:GO.
ai_disable ai_disable Causes NPCs (bots) to bypass their logic programming and instead just perform their idle animations.
ai_drawbattlelines ai_drawbattlelines [0 / 1] This console command will cause battle lines to show where an NPC has moved to to decide whether ground has been lost or gained.
ai_drop_hint ai_drop_hint [Hint ID] This command draws up a list of the different hint types you can trigger in CS:GO.
ai_resume ai_resume This command resets NPC (bots) movements if they are bugged from the command ai_step.
ai_set_move_height_epsilon ai_set_move_height_epsilon This command sets how high you can set NPCS (bots) to bump up ground walkers when checking steps.
ai_setenabled ai_setenabled [0 / 1] This cheat command toggles whether or not AI customization is on, similarly to the effect of ai_disable.
ai_step ai_step This command causes NPCs (bots) to freeze after finishing their last action.
ai_test_los ai_test_los This command tests the line of sight of NPCs (bots). Use with caution: this command can make your game client crash.
ainet_generate_report ainet_generate_report This console command generates a report inside the developer console.
Name Syntax Description
ainet_generate_report_only ainet_generate_report_only This command creates a report inside the developer console.
air_density air_density [Air Density ] This console command changes the air density inside of CS:GO. This is only used in drag computations.
askconnect_accept askconnect_accept This command causes you to accept a redirect request if your server has sent you one.
asw_engine_finished_building_map asw_engine_finished_building_map This is a command used to notify the game engine that a map has been finished being built. It won't be used by the majority of CS:GO players.
audit_save_in_memory audit_save_in_memory This command initiates an audit in CS:GO's save-to-memory system.
autobuy autobuy If you have set up an autobuy command with the cl_autobuy command then this command will attempt to purchase those items.
autosave autosave This command will save your game in certain single player instances in CS:GO.
autosavedangerous autosavedangerous This console command saves your game in certain single player modes of CS:GO.
bench_end bench_end This console commands ends the testing of your average framerate that the command bench_start counts.
bench_showstatsdialog bench_showstatsdialog This command will show you your recent benchmark stats if you've recently tested them.
bench_start bench_start This cheat command will begin testing your average framerate (FPS) over a period of time. You can end the test and receive your results with the command bench_end.
bench_upload bench_upload This console command uploads your most recent result from a benchmark test (triggered by bench_start and ended with bench_end) to the Valve servers.
benchframe benchframe [Demo Name] [Frame] [TGA Filename] This command takes a snapshot from a particular frame in a CS:GO demo.
blackbox_dump blackbox_dump This console command dumps the values of your black box in your developer console for you to view their data and file location.
bot_autodifficulty_threshold_high bot_autodifficulty_threshold_high Sets the difficulty rating of bots to high. The default value for bots' difficulty is 5, the minimum is -20 and the maximum is 20.
bot_autodifficulty_threshold_low bot_autodifficulty_threshold_low Sets the difficulty rating of bots to low. The default value for bots' difficulty is 5, the minimum is -20 and the maximum is 20.
bot_debug bot_debug [0 / 1] This command will toggle (0 = disabled, 1 = enabled) bot debug features.
bot_debug_target bot_debug_target This console command debugs bot issues but is primarily used for testing purposes.
bot_defer_to_human_goals bot_defer_to_human_goals [Value] This command prevents bots from doing scenario tasks when it is set on.
bot_defer_to_human_items bot_defer_to_human_items [Value] This console command prevents bots from taking scenario items when it is set on.
bot_join_after_player bot_join_after_player [0 / 1] This cheat command can be used to only have bots join the server you're on once another live player joins, which can be helpful to balance teams.
bot_pistols_only bot_pistols_only [0 / 1] Restricts bots on your server to only use pistols, meaning they can't use other weapons like Rifles or SMGs.
bot_show_nav bot_show_nav [0 / 1] This is command, when enabled (set to 1), will show each bots navigation mesh.
bot_show_occupy_time bot_show_occupy_time [0 / 1] This command brings up a display on your screen showing each area that can be first reached by either team. This is most of a map, so this command will cause low FPS for players using older and less powerful computers.
budget_averages_window budget_averages_window [Tested Frames] This command sets the number of frames you want the game client to test when figuring out your average frame count.
budget_background_alpha budget_background_alpha [Translucency] This command alters the translucency of the budget panel. Its default is set at 128.
bug bug This command shows the bug reporting UI in certain instances in game, though typically won't work in servers.
bugreporter_username bugreporter_username [Username] Sets your username for the bug reporter.
buildcubemaps buildcubemaps This command is used by the development team. Using it can cause your weapon to vanish from the screen, so avoid using it.
building_cubemaps building_cubemaps This command is used by the development team. Using it can cause your weapon to vanish from the screen, so avoid using it.
buildmodelforworld buildmodelforworld This command is used by the development team and can cause your game client to crash , so avoid using it.
cache_print cache_print This command prints a list into your console of all of the cached resources you have saved, along with how much memory they're taking up and what percentage that is of your total available space.
cache_print_lru cache_print_lru This command, just like the "cache_print" command, prints out a list of the cached resources you have into your developer console, as well as how much space that takes up in your files.
cache_print_summary cache_print_summary This console command prints only the summary of all your cached content in game. This means it doesn't spam your developer console with thousands of lines of data, letting you see what resources you have cached in a user friendly manner.
cam_collision cam_collision [0 / 1] You can use this command to attempt to make the third person experience in CS:GO run smoother, activated with the command "thirdperson". When turned on, it can prevent your camera from coliding with walls around the map.
cam_command cam_command [0 / 1 / 2] This command adjusts your in game camera view between first person (default) and third person.
cam_idealdelta cam_idealdelta [Camera speed] This command adjusts the speed that your camera attemps to fix any discrepancies between its angles when in third person mode.
cam_ideallag cam_ideallag [Camera speed] This command controls how fast you can move your camera around when in third person mode. The default value is 4.
cam_showangles cam_showangles [0 / 1] This command will enable a menu in the top right of your screen displaying the exact statistics for your camera angles when in third person.
cam_snapto cam_snapto [0 / 1] This command will snap your camera up its default position when in third person mode.
cash_player_damage_hostage cash_player_damage_hostage [Money Earned/Lost] This command sets the money lost or earned for damaging a hostage. By default this deducts $30 from the player for each time the hostage is damaged, and can be set to deduct even more or to award the player.
cash_player_get_killed cash_player_get_killed [Money Earned/Lost] This command sets the money earned or lost for getting killed by an enemy. By default this is $0, but can be changed to either award the player or take money from them.
cash_player_interact_with_hostage cash_player_interact_with_hostage [Money Earned/Lost] This command sets the money earned or lost for interacting with a hostage. By default this is $150, but can be changed to either award the player more or take money from them.
cash_player_killed_enemy_default cash_player_killed_enemy_default [Money Earned/Lost] This command sets how much money is earned or lost by killing an enemy player with a default weapon.
cash_player_killed_hostage cash_player_killed_hostage [Money Earned/Lost] This console command dictates how much money is earned or lost when a player kills a hostage.
cash_player_respawn_amount cash_player_respawn_amount [Money Earned/Lost] Sets how much money players respawn with.
cash_team_rescued_hostage cash_team_rescued_hostage [Money Earned/Lost] This command changes the amount of money that the whole team earns for one player rescuing the hostage.
cash_team_terrorist_win_bomb cash_team_terrorist_win_bomb [Money Earned/Lost] This command sets the amount of cash won by each player on the Terrorist team when they win a round by the bomb exploding.
cash_team_win_by_defusing_bomb cash_team_win_by_defusing_bomb [Money Earned/Lost] This console command sets the amount of money the CT team earns for winning a round by defusing the bomb.
cash_team_win_by_hostage_rescue cash_team_win_by_hostage_rescue [Money Earned/Lost] This cheat command changes the amount of money won by team members when they win a round by rescuing a hostage.
cash_team_win_by_time_running_out_bomb cash_team_win_by_time_running_out_bomb This command sets the amount of money that the CT players earn from winning a round by the time running out, meaning the Terrorists didn't get a bomb down or eliminate all the CT's in the required time limit.
cash_team_win_by_time_running_out_hostage cash_team_win_by_time_running_out_hostage [Money Earned/Lost] This command sets the amount of money won by the team guarding the hostages if they win the round by not allowing any hostages to be rescued within the time limit.
cast_hull cast_hull This command tests the game's hull collision detection by spawning a blue, cube-shaped object from the position your player model is standing across to reach the nearest solid surface you're looking at.
cast_ray cast_ray This console command tests the game's collision detection by spawning a small ray from where your character is standing to where they are looking.
cc_findsound cc_findsound [File Name] This command searches the game files for the file name you specify in the argument.
cc_flush cc_flush This cheat command flushes the game's cached and async'd captions, though you'll rarely be able to see them.
cc_lang cc_lang [Language] Attempts to adjust the game's close caption language settings. As this command is rarely used, most of the languages you enter won't be found and the client will default you to English.
cc_linger_time cc_linger_time [Time] This command sets how long closed captions linger on the screen for.
cc_predisplay_time cc_predisplay_time [Time] This command is used to determine how long the delay is before showing a closed caption compared to when it's triggered.
cc_random cc_random This command should emit a random caption, but commonly causes the CS:GO client to crash, so use with caution.
cc_subtitles cc_subtitles [0 / 1] This command decides whether or not to show subtitles in CS:GO during times where there are voiceovers.
ch_createairboat ch_createairboat This command should spawn an airboat in front of you, but produces an error message when used stating it can't create it as it's an unknown entity.
ch_createjeep ch_createjeep This command should spawn a jeep in front of you, but produces an error message when used stating it can't create it as it's an unknown entity.
changelevel2 changelevel2 [Map Name] This command changes the map you're playing on into a single player instance. Doing this can cause the map you're trying to load into to freeze.
cl_allowdownload cl_allowdownload [0 / 1] This command is client based and allows you to download customization files to the game.
cl_allowupload cl_allowupload [0 / 1] This command is client based and allows you to upload customization files to the game.
cl_animationinfo cl_animationinfo  
cl_avatar_convert_rgb cl_avatar_convert_rgb This console command converts any PNG avatars (steam profile pictures) in the avatars directory to RGB images.
cl_bob_lower_amt cl_bob_lower_amt [Value] This console command adjusts how much your gun barrel moves back towards you when you're running.
cl_bobamt_vert cl_bobamt_vert [Value] This command changes how much your viewmodel & gun barrel moves up and down when you're moving forward.
cl_brushfastpath cl_brushfastpath  
cl_camera_follow_bone_index cl_camera_follow_bone_index [-2 / -1 / 0] This command adjusts how the camera follows the index of the bone.
cl_chatfilter_version cl_chatfilter_version  
cl_clearhinthistory cl_clearhinthistory This command clears the game's memory of what in game hints (that pop up on your screen to prompt you to do something) it has shown you. This can make it show you those hints again.
cl_clock_correction cl_clock_correction [0 / 1] This command gives you the ability to toggle between being able to correct the in game clock.
cl_clock_correction_adjustment_max_amount cl_clock_correction_adjustment_max_amount [Milliseconds] This console command adjusts the maximum number of milliseconds it is possible to adjust the clock by.
cl_clock_correction_adjustment_max_offset cl_clock_correction_adjustment_max_offset [Milliseconds] This console command sets the maximum value (in milliseconds) the clock offset can be set to.
cl_clock_correction_adjustment_min_offset cl_clock_correction_adjustment_min_offset [Milliseconds] This console command sets the minium value (in milliseconds) the clock offset can be set to.
cl_clock_showdebuginfo cl_clock_showdebuginfo [0 / 1] This console command will produce a range of data in your developer console in an attempt to debug your client's clock.
cl_clockdrift_max_ms cl_clockdrift_max_ms [Milliseconds] The maximum amount of time the clock can be falty before it latches on to the server's clock in milliseconds.
cl_clockdrift_max_ms_threadmode cl_clockdrift_max_ms_threadmode  
cl_crosshairscale cl_crosshairscale  
cl_csm_server_status cl_csm_server_status This command allows you to check in on the server status.
cl_csm_status cl_csm_status Produces several statistics in your developer console about the status of your CSM.
cl_custommaterial_debug_graph cl_custommaterial_debug_graph [0 / 1] This command summons a debug graph to the left side of your screen in game.
cl_debug_ugc_downloads cl_debug_ugc_downloads  
cl_debugrumble cl_debugrumble  
cl_decryptdata_key cl_decryptdata_key [Message] This console command can be used to decrypt GOTV messages if you know the message ID.
cl_decryptdata_key_pub cl_decryptdata_key_pub [Message] This cheat command can be used to decrypt GOTV messages, if you know the message ID.
cl_detail_avoid_force cl_detail_avoid_force [Percentage] This command alters the force with which you'd like to avoid players.
cl_detail_multiplier cl_detail_multiplier  
cl_download_demoplayer cl_download_demoplayer [0 / 1 / 2] This command is used to decide whether or not downloading an external resource is allowed in the demo player.
cl_downloadfilter cl_downloadfilter [Filter] This determines what files can be downloaded from a few different options.
cl_entityreport cl_entityreport [0 / 1] This console command is used in debugging issues with the game. It produces a detailed list of statistics on your screen about the different entities used.
cl_extrapolate_amount cl_extrapolate_amount [Seconds] This console command adjusts how many seconds the game client extrapolates entities for when prompted.
cl_find_ent cl_find_ent [Substring] This command finds and then produces a list of all the client entites that exist within CS:GO that match a substring you enter.
cl_find_ent_index cl_find_ent_index [Index] This command searches the game files and produces a list in your console of all client side entities that match the index you specifiy.
cl_flushentitypacket cl_flushentitypacket [Amount] This command is used for debugging and foces the game engine to flush an entity packet.
cl_forcepreload cl_forcepreload [0 / 1] This command is to decide whether or not preloading should be forced on a server.
cl_fullupdate cl_fullupdate Using this command causes the server to produce and send a full update packet.
Odnośnik do komentarza
Udostępnij na innych stronach

Gość
Ten temat został zamknięty. Brak możliwości dodania odpowiedzi.
 Udostępnij

×
×
  • Dodaj nową pozycję...